Physical properties of Pb doped ZnS thin films prepared by ultrasonic spray technique

In the present work, high quality Pb doped ZnS thin films were deposited on glass substrates at 450°C using spray ultrasonic technique. The dependence of the structural, morphological and optical properties of the films on the lead (Pb) doping amount was investigated by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), UV–vis–NIR spectrophotometry, and four-point method. The improvement of the obtained Pb:ZnS thin films properties were discussed as a function of Pb concentration (0.5 to 2 at.%). The average crystallite size of Pb:ZnS was found in the range of 25–37 nm. The scanning electron microscopy (SEM) reveals that the films are continuous, homogeneous and dense. The UV–vis–NIR spectroscopy characterizations demonstrated that all the films exhibit good transmittance (60–70%) in the visible region and their optical band gap energy ($E_{\mathrm{g}}$) changes from 3.92 to 3.6 eV. The films electrical resistivity showed an apparent dependence on Pb content.     

超声共振法测定圆柱体材料弹性常数的影响因素分析

为明确超声共振频谱分析法(RUS)测定圆柱体试样弹性常数的影响因素, 由此针对各向同性圆柱体开展实验, 观察圆柱体试样测量结果的分散性和稳定性, 且主要研究横纵比和有效模态数量对测量结果的影响, 并与拉伸试验的结果进行比较. 以测量结果标准差、变异系数和95%置信度下均值的区间估计3个指标来衡量结果的稳定性和分散性, 且从模态简并角度对实验结果进行分析. 最终结果表明, 当超声共振频谱分析法的有效模态数量在17左右、试样横纵比接近1时, 测量结果的稳定性和分散性较小.     

自动石墨消解–电感耦合等离子体质谱法同时测定左氧氟沙星胶囊中7种金属元素

建立自动石墨消解-电感耦合等离子体质谱法(ICP-MS)同时测定左氧氟沙星胶囊中铅、铬、砷、镉、锡、铝、铁7种金属元素含量的方法。以HNO3-H2O2()体积比为1∶1为消解体系,采用自动石墨消解法消解左氧氟沙星胶囊样品,消解液除酸后,用5%硝酸溶液定容至50 mL,采用电感耦合等离子体质谱法对消解液进行测定,以内标法定量。铅、铬、砷、镉、锡、铝、铁的质量浓度在0.05~20.0μg/mL范围内与质谱响应值成良好的线性关系,相关系数均大于0.998,方法检出限为0.119~1.323μg/kg。样品加标回收率为91.2%~105.5%,测定结果的相对标准偏差为1.67%~3.46%(n=6)。该方法样品前处理简单,检出限低,测定结果准确,适用于左氧氟沙星胶囊等沙星类抗生素中多种金属元素残留的测定。     

Directing Group-Promoted Inert C−O Bond Activation Using Versatile Boronic Acid as a Coupling Agent

A simple Ni(cod)₂ and carbene mediated strategy facilitates the efficient catalytic cross-coupling of methoxyarenes with a variety of organoboron reagents. Directing groups facilitate the activation of inert C−O bonds in under-utilized aryl methyl ethers enabling their adaptation for C−C cross-coupling reactions as less toxic surrogates to the ubiquitous haloarenes. The method reported enables C−C cross-coupling with readily available and economical arylboronic acid reagents, which is unprecedented, and compares well with other organoboron reagents with similarly high reactivity. Extension to directing group assisted chemo-selective C−O bond cleavage, and further application towards the synthesis of novel bifunctionalized biaryls is reported. Key to the success of this protocol is the use of directing groups proximal to the reaction center to facilitate the activation of the inert C−OMe bond.     

Hydrolytic polycondensation of trimethoxymethylsilane under ultrasonic irradiation

1. Download : Download high-res image (86KB)
2. Download : Download full-size image

     

Optimisation of the ultrasound-assisted extraction of betalains and polyphenols from Amaranthus hypochondriacus var. Nutrisol

The present study optimised the ultrasound-assisted extraction (UAE) of bioactive compounds from Amaranthus hypochondriacus var. Nutrisol. Influence of temperature (25.86–54.14 °C) and ultrasonic power densities (UPD) (76.01–273.99 mW/mL) on total betalains (BT), betacyanins (BC), betaxanthins (BX), total polyphenols (TP), antioxidant activity (AA), colour parameters (L*, a*, and b*), amaranthine (A), and isoamaranthine (IA) were evaluated using response surface methodology. Moreover, betalain extraction kinetics and mass transfer coefficients (K_La) were determined for each experimental condition. BT, BC, BX, TP, AA, b*, K_La, and A were significantly affected (p < 0.05) by temperature extraction and UPD, whereas L*, a*, and IA were only affected (p < 0.05) by temperature. All response models were significantly validated with regression coefficients (R²) ranging from 87.46 to 99.29%. BT, A, IA, and K_La in UAE were 1.38, 1.65, 1.50, and 29.93 times higher than determined using conventional extraction, respectively. Optimal UAE conditions were obtained at 41.80 °C and 188.84 mW/mL using the desired function methodology. Under these conditions, the experimental values for BC, BX, BT, TP, AA, L*, a*, b*, K_La, A, and IA were closely related to the predicted values, indicating the suitability of the developed quadratic models. This study proposes a simple and efficient UAE method to obtain betalains and polyphenols with high antioxidant activity, which can be used in several applications within the food industry.     

厌氧消化过程化学变化的教学研究

有氧和无氧分解是生物体代谢有机物的2种途径,前者一直是生物化学课程中物质代谢的教学核心和重点。厌氧消化是有机物经无氧分解生成甲烷和二氧化碳的途径,相比于有氧分解,其具有化学反应众多、中间产物多、途径复杂等特点,同时对维护自然生态平衡、物质循环和人类社会的绿色健康发展等具有重要作用。如此重要的途径长期以来一直没有在生物化学教材与教学内容中体现,亟需进行教学改革。利用布鲁姆教学目标分类理论将厌氧消化过程中的主要反应、氧化还原过程及电子传递、热力学变化及串联反应等知识进行系统介绍,对物质代谢的另一条无氧路径进行补充,丰富了学生代谢网络的知识框架,完善了生物化学教学体系,相关教学内容和经验可供同行参考借鉴,对相关课程教学改革具有重要价值。     

高压密闭消解-电感耦合等离子体质谱法测定青藏高原气溶胶样品中磷及其他18种元素

气溶胶中磷（P）的准确测定是评估磷沉降对青藏高原生态效应及磷的生物地球化学循环的重要前提。针对青藏高原气溶胶中磷含量低及滤膜单个样品量有限的特征,本文建立了高压密闭消解-电感耦合等离子体质谱法测定气溶胶中磷及其他元素含量的方法。电感耦合等离子体质谱法（ICP-MS）测得P元素的检出限为3.5 μg/L,优于电感耦合等离子体发射光谱仪（ICP-OES）的检测限（89 μg/L）,其他元素检出限均达到μg/L（ppb）级（0.013-36 μg/L）,部分元素如Co、Cd、Pb等达到ng/L（ppt）级（2-7 ng/L）。各元素线性关系良好,测定结果的相对标准偏差(RSD) < 5%,磷的加标回收在90-103%, 方法准确度和精密度满足分析要求。该方法成功地测定了青藏高原实际气溶胶样品中磷及其他元素,具有良好的可靠性和实用性。     

增敏剂改进超级微波消解-电感耦合等离子体质谱(ICP-MS)法测定食品中硒元素

合适比例增敏剂会对超级微波消解-电感耦合等离子体质谱法(ICP-MS)测定食品中硒元素含量具有一定的优化效果。本文采用超级微波消解仪对1.0 g食品样品进行全消解,采用碰撞池模式规避质谱干扰,内标校正非质谱干扰,选择甲醇、乙醇、乙酸、异丙醇、丙三醇作为增敏剂,并调整测试过程中的添加比例,用电感耦合等离子体质谱法测定。结果表明：2%异丙醇存在时硒元素各同位素响应值最高,其中78Se具有低至0.0003 mg·kg-1的方法检出限;用以上方法对食品标准物质（GSB-8、GSB-9、GSB-24、GSB-30）及实际样品进行分析,标准物质测定值均在其认定值及不确定度范围内,相对误差小于-5.4%;实际样品测定值的相对标准偏差（n=7,RSD）为0.3~1.7%,加标回收率为99.2~105%。本方法操作简便,精密度好,准确度高,可以作为各类食品样品中硒含量测试方法。